FENDER HOT ROD DELUXE/DEVILLE CONTROL PANEL OVERLAY BLACK W/ WHITE LETTERS

Description

PLEASE READ ALL THE INFORMATION BELOW BEFORE MAKING YOUR PURCHASE.
This version fits most chrome panel Fender Hot Rod Deluxe and Hot Rod DeVille amps. If you are not sure which one you need, please send me a clear photo of your amp panel so I can help you find the right one.
Easy to install. Change the hard-to-see white letters on a chrome background, to forward facing white letters on a black background. Or if your numbers and letters have worn off, this decal will bring your control panel back to life. Also if you have a black face plate and the lettering has worn off this decal will fix that too.
When it arrives carefully remove the decal from the shipping box, gently unroll and lay flat, preferably in a warm place to help it flatten out. Carefully remove your knobs, then peel your decal from the backing, line it up and lay it down over the old panel. Smooth it out starting from the middle and work your way to the edges.
I have 2 versions of this decal available. Both of which come standard size and over-sized.
Please
send
me
a
message
during
or
after
your
purchase
telling
which
one
you
need
.
The standard size lays over the top of the faceplate without having to drop the chassis or remove the back panel. You only need to remove the knobs. This version is the easiest to install though it may show a little Chrome around the edge. Some buyers have used a black Magic Marker to fill that in.
The over-sized one requires you to remove the chassis for installation. Because it is over-sized it fits nicely under the cabinet and wraps over the back edge for a real clean look once the chassis is reinstalled. This is a good choice if you plan to take the amp apart for mod's or restoration.
Please read the following carefully to make your choice:
Version #1
- The original version has staggered holes where the 1/4" jacks are offset from the pots.
Version #2
- This version has the holes for the control pots and jacks in the same line instead of staggered like shown in the first 3 pictures. If this is the case with your amp, please let me know so I can send the right decal.
In the photo of the two decals Version #1 staggered holes is shown in the standard size in the top of the photo. Version #2 straight line holes is shown in the oversized version in the bottom of the photo. This gives you a reference as to the size difference between the two. Also the difference in the alignment of the holes.
Again if you are unsure please send me a photo of your amp faceplate prior to placing your order so I can get the right one to you.
If
you
do
not
send
me
a
message telling me which
one
you
want
,
I will send
you
a message
after
you
make
your
purchase
to
ask you which one
you
want
.
If you don't tell me within 48 hours, I will send version #1 standard sized.
The decal has a laminated matte finish, so the lettering won't rub off.
Again this is for the HOT ROD VERSION of these two amps.
Check my other auctions for the USA Blues Deluxe and Blues De'Ville models.
Please contact me if you have any other questions regarding this produc