Genzler Amplification 4 On The Floor Classic Bass Overdrive Pedal

Description

YOUR BEST SOURCE FOR PRO AUDIO GEAR
Free shipping
on Domestic orders
*
30-day returns
moneyback guarantee
Customer Support
Online Chat
Genzler Amplification 4 On The Floor Classic Bass Overdrive Pedal
Description
The 4 ON THE FLOOR™ Classic Bass Overdrive is an ALL ANALOG bass overdrive pedal that gracefully emulates 4 different overdrive types found in classic tube circuit topologies and then gives the player additional control over drive/gain, overdrive path (only) with high pass and low pass filters and separately a clean blend. The result is the ability to tailor and fine tune the overdrive to fit with a wide spectrum of music and playing techniques, without the loss of touch sensitivity, musicality, or the addition of induced excess noise. This versatile pedal can be used as a clean boost, an “always on” tonal enhancement, or offering varied overdrive textures to shift through, for selected performance requirements.
Drive Select “Gear” Descriptions:
1st GEAR: Reminiscent of a tube amp’s clean channel (including natural harmonics) with a bit of overdriven tone when driven hard. A nice “always-on” selection.
2nd GEAR: Emulates a tube amp’s mildly overdriven tone, with a small amount of dynamically compliant clipping asymmetry. This is a natural feeling, touch sensitive algorithm with very mild compression that responds with more texture and complexity, the harder you dig in.
3rd GEAR: A more aggressive up-shift from 2nd gear, this moderate, asymmetrical overdrive is less compliant, with greater compression for a tighter feel.
4th GEAR: This is the most aggressive gear of all — a heavier, symmetrical, low compliance overdrive that can enter distortion territory when driven hard. While there are a lot of harmonics and compression present, this gear does not give up tone or feel.
With the versatility in overdrive algorithms and tonal options, the 4-OTF-PEDAL is an excellent compliment to either of our MAGELLAN 350 or MAGELLAN 800 bass amps.
Features:
Lightweight Aluminum Chassis
Rugged Stomp Switches
Low-noise, Silent Switching Circuitry
4 Position Overdrive “Gear” Selector Switch
High-Pass and Low-Pass Filters (Overdrive Engine Only)
Parallel Clean Signal Path
High/Low Drive Sensitivity Switch
Accepts Power Supplies From 9VDC – 18VDC (low noise type),
Either Polarity (auto detecting) 40mA Max — (Power Supply Not Included)
Specifications
Power Supply: 9VDC-18VDC (low noise type), either polarity (auto-detecting), 40mA max (Power supply not included).
Input Impedance: >1M ohm
Output Impedance: 1k ohm
Overdrive Engine Input HPF: 30Hz – 200hz
Overdrive Engine Output LPF: 1kHz – 14kHz
Input Sensitivity (nominal): -20dBu (high sensitivity), -10dBu (low sensitivity)
Maximum Input Level: 0dBu (9V supply), +5dBu (12V supply), +10dBu (18V supply), high sensitivity, DRIVE at 9:00
Maximum Input Level: +5dBu (9V supply), +12dBu (12V supply), +18dBu (18V supply), low sensitivity, DRIVE at 9:00
Maximum Output Level: +9dBu (9V supply) +14dBu (12V supply), +20dBu (18V supply)
Dimensions: 5” (127mm) W x 4.1” (104mm )D x 2.3” (59mm)H
Weight: 1.1 lb (0.5kg)
*We only offer free shipping to the lower 48 contiguous states. AK, HI, APO, FPO and US Protectorates (PR, VI and American Samoa) addresses will incur additional shipping charges. Please contact us for a shipping quote. These shipments will only be shipped via Priority Mail. There are some instances that free shipping will be offered if they are smaller and lighter items.